Catalog

Cal-Royal ½” door viewer cover is designed to be used with DV90, DV91, ULDV160 door viewers.   Technical Data Architectural Finishes Hardware Catalog Warranty   Cal-Royal Products, Inc. Model COV160 US26D / 626-652 Satin Chrome ...

Cal-Royal 9/16” door viewer cover is designed to be used with DV180, ULDV200, ULDV201 door viewers.    Technical Data Architectural Finishes Hardware Catalog Warranty   Cal-Royal Products, Inc. Model COV200 US26D / 626-652 Satin...

Cal-Royal Hotel Privacy Door Latch HPDL258 is recommend for use in environments with corridor to room openings like hotels, dormitories, apartments and private residences. This  security door latch allows the door to be partially opened while...

Cal-Royal PDL-200 hotel privacy door latch disengage tool is used as an emergency release tool for privacy door latch.  Will disengage the Cal-Royal HPDL258 door latch if it was accidentally activated from the inside.  Can only be...

Door Angle Protector comes with adhesive and individual screw for secure mounting. Designed for use with BBDHG88 and PDG88. Architectural finishes available.   Technical Data Architectural Finishes Hardware Catalog Warranty Overall Dimensions:...

This swing bar door guard has an architectural US3 polished brass finish.  Manufactured with zinc material in a die cast.  The stop guard has a ball bearing design and comes with screws, ready to install.   Technical Data...

This swing bar door guard has an architectural US26D satin chrome finish.  Manufactured with zinc material in a die cast.  The stop guard has a ball bearing design and comes with screws, ready to install.   Technical Data...

The Cal-Royal SBDG00-US10B oil rubbed bronze swing bar door guard is solid brass and comes with the angle door protector.  For use on doors that are flush with frames.  When installed correctly, the angle door protector helps to prevent...

Cal-Royal has a ball bearing stop guide. Protective rubber on both sides of arm. Provides extra security to doors.  Individually poly-bagged with sheet metal screws. Conforms to ANSI/BHMA 156.16. Arm Length 4-1/2".   Technical Data...

Cal-Royal Door Guard Shim is to be used when the face of a door is recessed from face of jam. Fits under door Guard. Used with BBDHG88 and PDG88. Technical Data Architectural Finishes Hardware Catalog Overall Dimensions: 5/8" x 2-5/16" Thickeness:...

Cal-Royal Door Guard Shim is to be used when the face of a door is recessed from face of jam. Fits under door Guard. Used with SBDG00. Technical Data Architectural Finishes Hardware Catalog Warranty Overall Dimensions: 1-1/8" x 1-11/16" Thickeness:...

Cal-Royal Solid Brass Door Chain provides security while you are still able to view through door. Welded Solid Steel Chains prevent forced entry. Individually poly-bagged with sheet metal screws. Conforms to ANSI/BHMA 156.16. Chain length: 9"....

The JL RSCBB-Y safety grab bar features universal mounting that makes it versatile and adaptable to various hatch configurations, ensuring ease of installation without compromising the integrity of the roof membrane or interfering with hatch...

The LP-4 Safety Post provides a convenient and safe method of climbing off and onto fixed access ladders. The LP-4 Safety Post comes pre-assembled and attaches directly to the top two rungs (square or round) with two u-shaped bolts. When at the top...

RSLP-G Spring-Balanced Ladder Post is designed for safe entry and exit assistance from roof hatch or floor door in an upright and balanced position. Safety post comes fully assembled, ready for installing onto fixed vertical ladder rungs....

The JL RSLP-Y extendable ladder safety post powder coat yellow is a spring balanced ladder safety post designed to provide safe entry and exit assistance at roof hatches or floor door openings.  It helps users transition on and off fixed...

The EZ-Up LP-6 ladder post provides easy and safe access through a roof hatch. The assembly permanently mounts to the roof hatch and acts as an extension to the ladder to enable users to safely enter and exit a roof access hatch. After the user...

Koala Kare KB977 is discontinued. Koala KB977 KidSitter DimensionsW x H x D 22-1/4" x 31" x 22-1/2" Instructions Sell Sheet  Maintenance Checklist  Seating Brochure  High Chair Compliance Koala Kare Catalog  Limited Warranty...

Foundations Neat Seat High Chair is made to withstand the high traffic use of the restaurant environment. This high chair features a high back for extra support, rounded corners, EZClean Harness and a restraint in the seat to prevent slip-through....

Foundations Neat Seat High Chair is made to withstand the high traffic use of the restaurant environment. This high chair features a high back for extra support, rounded corners, EZClean Harness and a restraint in the seat to prevent slip-through....

The new Koala High Chair combines unique design features, durability and safety. Stackable! Smooth, seamless solid HDPE plastic construction is exceptionally sturdy and cleanable; sanitation is assured because there are no crevices to collect food...

KB615 Koala Stowe™ offers a sleek, contemporary design that will complement any restaurant setting. The table height design allows children to eat off of a standard restaurant table with the whole family. Constructed of beechwood and plastic, this...

Koala Kare KB833 Eco Chair is a truly “green” high chair manufactured from 100% post-consumer plastic. Available in two desirable colors to match decors.KB833-01 GreyKB833-09 Brown  Smooth surfaces allow for quick and simple cleaning. Passive...

KB950-01 Koala Diner Chair is a restaurant staple with its updated design on the traditional plastic high chair. Durable construction provides long lasting use. Color choices (Grey -01 and Brown -09) integrate this chair into many different...

KB950-09 Koala Diner Chair is a restaurant staple with its updated design on the traditional plastic high chair. Durable construction provides long lasting use. Color choices (Black 02, Grey -01 and Brown -09) integrate this chair into many...